The quality you get with a board that is machined in Logosol's planer/moulder equals the quality by any other machine on the market. Other than the very high cost associated with other machines that produce high-end finished products, the only other difference is speed. While some other machines are faster, the 1200+ linear feet per hour (400 m/hour) that the PH260 produces is more than capable of keeping up with your highest demand jobs. The PH260 is different from traditional multi-cutter planers due to the top cutter and bottom cutter being suspended on both ends of the cutter shaft. Due to this, the machine is extremely stable, even though it has considerably wider cutters than most large planer/moulders. The machine table, where the bottom cutter and the side cutters are fitted, is made of heavy cast iron. The machine chassis is made of 5/32" (4 mm) sheet steel. Läs mer: http://www.logosol.se/hyvlar/profilhyvel/